Bullion Trimcut






These simple machines will cut one year growth on windbreaks, fruit trees and are used as an aid to pruning blackcurrants (for which we make a modified arm).

The lightweight linkage mounted (Cat. 1) cutter bar hedge cutter has a swingover feature allowing cutting both sides of the tractor. Hydraulic adjustment of reach, lift and cutter bar angle are by levers mounted inside the tractor cab. The cutter-bar is hydraulically driven with the motor fed from the return line of the multi function armhead control valve. All hydraulic functions are powered by the tractor's internal pump.
Technical specifications

* Maximum reach - topping 3.47#
* Siding reach (min.) 1.10m #
* Siding reach (max.) 2.15#
* Max. height - siding 4.5m

* Reach down 45 deg slope 1.87m
* Max. height - topping 3.10m
* Cutting width 1.2m (Optional 1.6m bar)
# Measurements taken from tractor centre line

Cutter bar angling - Hydraulic 250 deg continuous
Breakback - Auto reset gravity type
Machine weight - 180kg
Min. recommended tractor weight - 550kg
Tractor hydraulic flow requirement - 14-21 L/min achieved by regulating engine speed

Measurements

 

Back to top of page

 


Please click on image to enlarge

 

 

 


N P Seymour, Avon Works, Cranbrook, Kent. TN17 2PT, United Kingdom.
Tel: ++ 44 1580 712200 Fax: ++ 44 1580 715191

Send mail to webmaster@npseymour.co.uk with questions or comments about this web site.
Copyright © 1998-2010 N.P. SEYMOUR

Content for New Div Tag Goes Here