Ladurner cultivators

These range of cultivators are amazing inter-plant close proximity hoeing machines! They remove weeds very well taking away any need for chemicals so are suitable for both organic and conventional growers. The sensor arm works around plants or obstacles therefore allowing precise cultivation.

“The Ladurner has transformed our organic farm, there is no other machine that would keep our orchard as clean and tidy as this without using herbicides” - Richard Castle, DJ Moor Organics Ltd.

The machines are available single or double sided and for front or rear mounting, please see the list of different models below.

Orchard and vineyard models

Ladurner double sided Cultivator Mod. 7H
*Working area - rear
*Drive - PTO + 12V + Hydraulic
*Controls - electric - hydraulic
*Working depth - 0-10 cm
*Plant width - 200-420 cm
*Working width - 40-50 cm
*Power requirement - 45Kw/62HP

Ladurner double sided Cultivator Mod. 7HS
Narrow version for vineyards.
*Working area - rear
*Drive - PTO + 12V + Hydraulic
*Controls - electric - hydraulic
*Working depth - 0-10 cm
*Plant width - 170-400 cm
*Working width - 40-50 cm
*Power requirement - 45Kw/62HP

Ladurner Cultivator Mod. 7F
*Working area - front or rear
*Drive - PTO + 12V + Hydraulic
*Controls - electric-hydraulic
*Working depth - 0-10 cm
*Plant width - 40-50 cm
*Power requirement - 45Kw/62HP

Ladurner Cultivator Mod. 7FS
Narrow version for vineyards.
Working area - front or rear
Drive - PTO + 12 + Hydraulic
Controls - electric- hydraulic
Working depth - 0-10 cm
Plant width - 170 - 400 cm
Working width - 40-50 cm
Power requirement - 45Kw/62HP

Ladurner Cultivator Mod. 7K
Working area - special front for Fendt
Advantage - close coupling with special plate and quick coupler (Length from tractor 170 cm)
Drive - PTO + 12V + Hydraulic
Controls - electric-hydraulic
Working depth - 0-10 cm
Plant width - 220 -360 cm
Working width - 40-50 cm
Power requirement - 45Kw/62HP

Ladurner Cultivator Mod. 9H Single Sided
Working area - rear
Drive - PTO + 12V + Hydraulic
Controls - electric-hydraulic
Working depth - 0-10 cm
Plant width - 200-420cm
Working width - 40-50 cm
Power requirement - 45Kw/62HP

Ladurner Cultivator Mod. 9F Single Sided
Working area - front
Drive - PTO + 12V + Hydraulic
Controls - electric-hydraulic
Working depth - 0-10 cm
Plant width - 200-420 cm
Working width - 40-50 cm
Power requirement - 45Kw/62HP

Ladurner Cultivator Mod. 10 Single Sided
Working area - rear
Drive - PTO + 12V + Hydraulic
Controls - electric - hydraulic
Working depth - 0-10 cm
Plant width - 250-400 cm
Working width - 40-50 cm
Power requirement - 45Kw/62HP


Ladurner Flail Weeder with rubber flaps
Plant width - 220-400 cm
Working width - 40-50 cm
Power requirement - 45Kw/62HP




Back to top of page

Please click on images to enlarge